How to setup via the VIOFO App and live viewing through the App:
● Make sure the unit is turned on and that you have downloaded the VIOFO application onto your
phone
● Now we need to turn on the WIFI on the dash camera so that you can connect to it through the
VIOFO application
● To turn on the dash cameras WIFI, hold down the "Live Video WIFI" button that is located to the
right of the "Mic" button for about 5-10 seconds until you see a WIFI bar emblem pop up on the
units screen also the red LED should now be lighting up above the WIFI option on the device
● From this point, open up the VIOFO app on your phone. Once you've opened up the App, you will
see a big red button on the bottom of the App that says "Connect Your Camera" go ahead and
click on that, and it will then search for the dash camera
● The App will then prompt you to ensure the unit's WIFI is turned on. Go ahead and click
"Continue," and then on the next page, go ahead and click the "Ok" button
● Your phone will automatically pull up the WIFI settings on your phone; now, you will connect to
the camera's WIFI. The dash cam's name and default password will be shown on the units
screen. Example: VIOFO_A129_
● Once you have connected to the camera's WIFI, go ahead and go back into the VIOFO App
● Now, when you open up the App, you will see the same "Connect To Camera" button. Go ahead
and click that. Now you should be able to live view your camera
● To get into the settings, you will need to stop the unit recording, hit the red button in the bottom
center of the screen. Click the "Cogwheel" icon to the right of the "Rec" icon. Now you will have
access to set up the camera and view live
How to playback, delete and lock files on the device:
● Make sure the unit is turned on
● End the individual recording by tapping the "Rec" button for 1 second
● Once the red recording light is off, press and hold the "!" button. This will access the recorded
files
● To select a file, use the "Rec" and "Mic" buttons to navigate
● Once highlighted, press the "!" button to select
● To play the file, press the "!" button. This also can be used to pause the recording
● To delete a recording, press the "Rec" button on the recording you would like to delete. It will then
pop up and prompt you to make sure you would like to delete the recording. If yes, press the
"Mic" button to move the option to "Ok," then hit the "!" button to delete the recording
● To lock a recording, so it does not get overwritten, you will need to have the recording pulled up
as if you were going to do playback. Hit the "Mic" button, which will lock the recording on the
micro SD card, keeping it from being deleted or overwritten
● To exit playback, tap the "Menu" button two times
