SPX Radiodetection RD8000, User Manual

Page: 7 / 100

ENGLISH
7
Locator features
1. Keypad.
2. LCD.
3. Battery compartment.
4. Accessory slot.
5. Headphone jack.
Locator keypad
6. Power key : Switches the unit on
and off. Opens the locator menu.
7. Frequency key : Selects frequency.
Closes submenu.
8. Up and down arrows : Adjusts
the signal gain. Scrolls through the
menu options.
9. Antenna key : Toggles peak, null,
single antenna and combined peak/null
modes. Opens a submenu. Prolonged
key press toggles between depth or
current display on the LCD.
10. Graph key : Saves SurveyCERT
™
measurements.
11. Transmitter key : Sends iLOC
™
commands on iLOC
™
enabled locators
to iLOC
™
enabled transmitters.
Locator screen icons
12. Indicates the signal strength and peak
marker.
13. Signal strength: Numerical indication of
signal strength.
14. Left / Right Proportional arrows:
Indicates the location of the line relative
to the locator.
15. Battery icon: Indicates the battery level.
16. Sensitivity and Log number: Displays
signal gain / sensitivity, or the log
number momentarily after a survey
log is saved to memory.
17. Volume icon: Displays the volume level.
18. Current Direction arrows: Used
for CD and Fault Find features.
19. Radio Mode: Indicates when Radio
Mode is active.
20. Power Mode: Indicates when Power
Mode is active.
21. Accessory indicator: Indicates when
an accessory is connected.
22. CD Mode icon: Indicates when Current
Direction Mode is active.
23. A-Frame icon: Indicates when the
A-Frame is connected.
24. Operating mode indicator / menu
display.
25. Bluetooth
®
icon: Indicates status of
Bluetooth
®
connection. Flashing icon
means pairing is in progress. Solid icon
indicates an established connection
is active.
26. Antenna mode icon: Indicates antenna
selection: Peak, Null, Single and
combined Peak/Null.
27. Sonde icon: Indicates that the signal
source is from a sonde.
28. Line icon: Indicates that the signal
source is from a line.
29. Compass: Shows the direction of the
located cable relative to the locator.
30. Tx status: Displays transmitter
connection status (on iLOC enabled
models).
31. Tx standby: Indicates that the
transmitter is in Standby Mode
(on iLOC enabled models).
32. Current / depth indicator.