ENGLISH
21
will download to that destination. Once completed, you will have the option to Run
or Open Folder. At this stage Centros Manager has not been installed so you can
either select Run and Centros Manager will automatically install or you can choose
to Open.
Folder:
When you open the folder the Centros Manager executable file will be
available. To install double click on this file.
3. When Centros Manager is installed run from the Windows Start menu under
Programs or alternatively, use the Centros Manager shortcut on your desk top if you
have opted to have this during installation of Centros Manager.
Note:
Once Centros Manager is open, click on Help to gain access to the Centros
Manager Operation Manual.
eCAL
™
Each time you use a locator you want to be confident that the equipment you are using
continues to perform to the same standard as it did when it first left the factory. eCAL
provides users with the following features which can be accessed and carried out on
site, without the need to return the locator to a service centre.
• Checking the validation of the RD8000 with the original stored factory calibration
results.
• Carrying out a functional check.
• Retrieving original factory calibration certificate or previous eCAL validation
certificates.
To validate your RD8000, you must carry out the following:
1. Register your RD8000 locator at
www.radiodetection.com/extendedwarranty
.
See page 5 for more details.
2. Purchase an eCAL key at
www.radiodetection.com/ecal
or alternatively contact
your local Radiodetection representative.
3. Download Centros Manager at
www.radiodetection.com/centrosmanager
.
See page 20 for details.
Using eCAL to validate the RD8000
1. Connect the RD8000 via the USB connector inside the battery compartment to a
suitable USB port on a PC or laptop.
2. Switch on the RD8000 (no segments will be lit but the backlight will be on).
3. Open Centros Manager and click on Locator eCAL Validation.
4. Copy the eCAL key (received in your confirmation email when purchasing the eCAL
key). Click on Load Validation Key icon and paste the eCAL key.
5. Click on Run eCAL Validation. The progress of the eCAL will be displayed in the
message box. Please follow the instructions.
Summary of Contents for Radiodetection RD8000
