SPX FLOW Hankison HPR Series Instruction Manual Download Page 11

AUTHORIZATION FROM THE SERVICE DEPARTMENT IS NECESSARY BEFORE MATERIAL IS 

RETURNED TO THE FACTORY OR IN-WARRANTY REPAIRS ARE MADE.

WARRANTY

The manufacturer warrants the product manufactured by it, when properly installed, operated, applied, and maintained in accordance with proce

-

dures and recommendations outlined in manufacturer’s instruction manuals, to be free from defects in material or workmanship for a period as 

specified below, provided such defect is discovered and brought to the manufacturer’s attention within the aforesaid warranty period. 

The manufacturer will repair or replace any product or part determined to be defective by the manufacturer within the warranty period, provided 

such defect occurred in normal service and not as a result of misuse, abuse, neglect or accident. Normal maintenance items requiring routine replace

-

ment are not warranted. The warranty covers parts and labor for the warranty period unless otherwise specified. Repair or replacement shall be made 

at the factory or the installation site, at the sole option of the manufacturer. Any service performed on the product by anyone other than the manu

-

facturer must first be authorized by the manufacturer.

Unauthorized service voids the warranty and any resulting charge or subsequent claim will not be paid.  Products repaired or replaced under warranty 

shall be warranted for the unexpired portion of the warranty applying to the original product.

The foregoing is the exclusive remedy of any buyer of the manufacturer’s product. The maximum damages liability of the manufacturer is the original 

purchase price of the product or part.

THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, WHETHER WRITTEN, ORAL, OR STATUTORY, AND IS EXPRESSLY IN LIEU 

OF THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. THE MANUFACTURER SHALL 

NOT BE LIABLE FOR  LOSS OR  DAMAGE BY REASON OF STRICT LIABILITY IN TORT OR ITS NEGLIGENCE IN WHATEVER MANNER INCLUDING DESIGN, MANUFAC

-

TURE OR INSPECTION OF THE EQUIPMENT OR  ITS  FAILURE TO DISCOVER, REPORT, REPAIR, OR MODIFY LATENT DEFECTS INHERENT THEREIN.

THE MANUFACTURER, HIS REPRESENTATIVE OR DISTRIBUTOR SHALL NOT BE LIABLE FOR LOSS OF USE OF THE PRODUCT OR OTHER INCIDENTAL OR CONSE

-

QUENTIAL COSTS, EXPENSES, OR DAMAGES INCURRED BY THE BUYER, WHETHER ARISING FROM BREACH OF WARRANTY , NEGLIGENCE OR STRICT LIABILITY 

IN TORT.

The manufacturer does not warrant any product, part, material, component, or accessory manufactured by others and sold or supplied in connection 

with the sale of manufacturer’s products.

Warranty Period

Parts and labor for two (2) years from the date of shipment from the factory; heat exchangers are covered (parts only) for an additional three (3) 

years (total of five [5]).  On units that manufacturer requests be returned to the factory, a one time removal/reinstallation labor allowance as noted in 

the Service Warranty Policies and Procedures Handbook will apply. Freight to the factory from the installation site and to the installation site from the 

factory will be paid by the manufacturer; means of transportation to be specified by manufacturer.

SERVICE DEPARTMENT: (724) 746-1100

Summary of Contents for Hankison HPR Series













Reviews: