SPX Cooling Technologies Marley QuadraFlow Marley QuadraFlow, Brochure, Page: 6 / 8

The QuadraFlow is factory-fabricated, and is designed to be
assembled at the jobsite. This allows the design flexibility that
results from the unique QuadraFlow configuration and permits a
wide variety of orientations.
Normally this assembly is included as part of the cooling
tower contract, and is performed by erection subcontractors
recognized and sanctioned by SPX. Their knowledge and
expertise assures proper fit-up, alignment, and sealing of the
various tower components—and contributes significantly to the
trouble-free long-term operation of the tower. It also enables
SPX to guarantee the thermal performance of the assembled
tower. Therefore, it is strongly recommended that either SPX
supervision or complete tower erection be included as part of
your order.
Nevertheless, we recognize that circumstances may
produce situations that require the tower to be assembled by
inexperienced personnel without benefit of SPX erection labor
or supervision. In support of that, a comprehensive, illustrated,
assembly instruction manual is included with every shipment.
This manual pictorially identifies the various tower components
and provides step-by-step instructions designed to result in a
properly assembled installation. Copies of this manual are also
available to customers, on request, prior to the shipment of the
tower to permit planning of the assembly process. However,
we regret that thermal performance of a QuadraFlow cannot be
certified or guaranteed without qualified SPX supervision during
the assembly process.
/ On-Site Assembly /