SPT WA-9020E, Instruction Manual

Page: 5 / 8

Parts
1. Control Panel
2. Cooling Air Outlet
3. Handle
4. Castors 5. Air Filter
6. Air Inlet
7. Exhaust Air Outlet
8. Cord Hanger
9. Water Stopper (Rubber Plug Inside)
Accessories
10. Adaptor - for insertion over the hose and
into the back of the air conditioner.
11. Exhaust Hose
Length:
14”-60”
Diameter: 4.75”
12. Foam Strip - for filling the open window
space and with a hole for connection to th
exhaust hose.
13. Foam Strip - for filling the open window
space.
14. Round Connector - to be used between
hose and window kit or between hose and
wall.
15. Cap for Round Connector
16. Remote Control
(Electronic control models only)
6
1
2
3
4
5
6
7
8
9
'LPHQVLRQ
'LPHQVLRQ
Installation
WARNING!
The length of the exhaust pipe is specially
designed according to the specification of this
product.
Do not replace or extend it with your own hose
as this could cause the unit to malfunction.
5
Mounting the exhaust pipe
•
The supplied exhaust hose can be
extended from 1 foot to 5 feet for
mounting. It is recommended that
you use the shortest possible length
of hose.
•
Take care to prevent any kink or
bend in the middle of the exhaust
hose, as this will trap hot exhaust
air, which will radiate back into the
room.
Installation of the Carbon Filter
1. Remove the filter frame from the unit.
2. Separate the filter from the filter frame.
3. Remove the active carbon filter from its
plastic bag.
4. Insert the active carbon filter into
the filter frame.
5. Fix the filter by reassembling
the fixer onto the filter frame.
6. Re-fit the filter frame inside
the unit.
7. It is recommended to replace
the carbon filter every 3 to 6
months..
[ [
0
” ” ”
[ [
0
” ” ”