6
SPARCIN 9 / SPARCIN 9C
Air plasma cutting
Use the electrode for air as plasma generating gas.
Gas plasma cutting
Use the electrode for technical gas; nitrogen (N
2
), argon/hydrogen mix (Ar/H
2
) or
nitrogen/hydrogen mix (N
2
/H
2
)
Use the nozzle marked 0,9, part no. 199060 for cutting plate thickness up to 6 mm, for thicker
plates, use the nozzle marked 1,1, part no. 199001.
PLEASE NOTE!
The plasma cutting torch is a component designed for high power
outputs. Please handle the torch body and hose assembly with care.
With the proper handling, by an operator with the proper knowledge, the lifetime of the
cutting torch will be very long, and the low wear on nozzles and electrodes will give good
cutting economy. A damaged hose assembly, e.g. with air or water leakage, will infallibly
damage the torch body.
NEVER USE A DAMAGED PLASMA CUTTING TORCH!
Summary of Contents for SPARCIN 9
Page 32: ......
