SAFETY FEATURES
1. A thermal overload protector is built in to prevent overheating.
2. In case of overheating, the heater will automatically shut off. It will resume normal operation
only after the user resets the unit. (See reset instruction below)
3. If the unit is tilted or knocked over a safety system will automatically cut off the power, put
the unit in a vertical position and start as normal.
To Reset Heater:
1. Unplug the heater and wait 5-10 minutes for the unit to cool down.
2.
Then, turn on the unit again and operate normally.
MAINTENANCE
WARNING:
ALWAYAS UNPLUG THE CORD BEFORE MOVING OR SERVICING, DO NOT
IMMERSE THE HEATER IN WATER.
CLEANING:
IMPORTANT! DO NOT IMMERSE HEATER IN WATER!
Take the Air Inlet and the Air Filter off, clean the Air Inlet with the vacuum brush
attachment on your Vacuum cleaner, and wash the Air Filter in warm water and
dry it. DO NOT DRY AIR FILTER IN DIRECT SUNLIGHT. Clean the body of the
Heater with a soft cloth.
CAUTION:
Do not use gasoline, benzene, thinner, harsh cleaners, etc. as they will damage
the heater. NEVER use ALCOHOL or SOLVENTS.
STORAGE:
Store the heater with these instructions in the original in a cool, dry place.
DEFECTIVE NOTICE
If this product is defective or not working properly
DO NOT return to your retail store
Please contact the manufacturer directly.
For Service or Technical Assistance
Contact:
SUNPENTOWN INTERNATIONAL INC.
626-336-2299
14625 Clark Ave, City of Industry, CA 91745
5
