•
To adjust “SET TEMP”, press the ‘UP’ button to increase the desired temperature and the
‘DOWN’ button to decrease the desired temperature. The LCD will display a ‘SET TEMP’
indicator, (As SHOWN IN FIGURE 3). The LCD will display the current ROOM temperature
about 10 seconds after setting is complete.
•
When the air temperature reaches 1 degree above the SET TEMP, the heater will cut off.
•
When the air temperature drops 1 degree below the SET TEMP, the unit will come back on.
•
Note: it is normal for the heater to cycle ON and OFF as it maintains the SET TEMP. You
may hear a slight clicking sound when it cycles On and Off.
7
．
OSC: Pressing the ‘OSC’ button will allow the heater to oscillate. To stop the oscillation,
press the ‘OSC’ button once more. (Besides the 70 degree, Auto oscillation, there is a 60
degree Manual oscillation
)
(As shown in FIGURE 5)
8
．
TIMER: The timer function allows you to set the length of operation from 0.5 hour to 7.5
hours. Pressing the ‘TIME’ button will increase the length of operation by 0.5 hour each time.
(As shown in FIGURE 6)
9. To turn the heater off, press the ‘POWER’ button, and the unit will work in the FAN MODE for
30 second prior to turning completely off.
REMOTE CONTROL
1. Install two “AAA” batteries as shown in FIGURE 7.
2. The Remote Control is exactly the same as the control panel on the machine. All functions
performed with the Remote Control work identically to the Manual Controls.
4
