4. Press "WIND" button to choose the wind mode. The corresponding indicator light will illuminate:
NORMAL: fan operates according to selected speed (Low/Medium/High)
NATURAL: imitates the blow of natural wind by cycling through the different speeds.
SLEEPING: unit operates on High fan speed for the first 30 minutes, then Medium for the next
30 minutes and finally Low until Sleep mode is exited, unit powered off or end of preset time.
5. Press "TIMER" button to set the timer function. Each press is in increments of 1 hour, up to 9 hours.
The number of hours set will be displayed on the control panel.
6. Press "MIST" button to initiate the humidifying/misting function. The corresponding indicator light will
illuminate and ultrasonic fine mist will disperse out the front misting plate.
7. Press "OFF" button to switch off the fan, all fan functions will return to default.
REMOTE CONTROL
The remote control must be directed at the infrared port of the unit when using the remote control. If the
remote control is not responding, please check the batteries first and change with new batteries if
needed. The remote control uses two (2) “AA” batteries.
Notes: Replace batteries with new ones of the same type or remote control may not operate properly.
Remove the batteries when storing the unit or if you don’t plan to use the remote control. Batteries left in
the remote for a long period of time may damage the remote.
CLEANING AND MAINTENANCE:
Turn power off and disconnect power cord from the electrical outlet.
Water tank should be cleaned once every two weeks.
Clean the flume once a week.
Remove water tank when cleaning the fan.
Gently pull out the plastic tube, then take out the atomizing cup for cleaning.
Use a dry cloth to absorb remaining water when cleaning the atomizing cup. Dry with a soft cloth. If
water is excessively dirty, use a mild detergent.
It is recommended to add a few drops of lubricant to the motor shaft after cleaning to extend the life of
the motor. This only needs to be done about once a year.
If unit is not to be used for a period of time, please clean and allow air dry thoroughly before
packaging. Store in a cool dry place.
