ADDING WATER TO THE WATER TANK:
Be sure power is turned off and power cord unplugged. Remove water tank according to the six steps
below and add water accordingly.
Note: Do not fill with hot water (104°F / 40°C or above). Use cold water for best cooling results.
OPERATING THE FAN:
Locate fan on a dry, level surface, away from direct sunlight. Plug cord into any standard 120-volt AC
outlet, the indicator light on the control panel will illuminate. The fan is ready for use and can be controlled
by either the remote control or the control panel on the unit.
1. Press "ON" button to power ON.
2. Press "SPEED" button to choose fan speed: Low, Medium or High. The LED screen on the control
panel will indicate the selected fan speed.
3. Press "SWING" button to initiate auto-swing of the louvers. The corresponding indicator light will
illuminate. Press this button again to stop oscillation.
Note: This is an inactive button.
