background image

Filter Assembly

The filter efficiently removes food particles so the wash water can be recycled during a
wash cycle. For best performance and results, the filter assembly must be cleaned 
regularly. It is recommended to remove the larger food particles trapped in the filter after
each use by rinsing the filter assembly under running water.

13

MAINTENANCE

Filter System

The filter system consists of a Coarse Filter, a Fine Filter and a Main Filter. The filter 

system prevents large remnants of food or other objects from getting inside the pump.

C. Coarse Filter

    Larger items, such as pieces of bone or glass, that could
    block the drain are trapped in the coarse lter. To remove
    items caught by this lter, gently squeeze the tap on the
    top of the lter and lift out.

B. Fine Filter

    This lter holds soil and food residue in the cylindrical base 
    and prevents it from being redeposited on the dishes.

A. Main Filter

    Food and soil particles trapped by this lter are pulverized by
    a special jet on the spray arm and washed down the drain.

To remove filter assembly:

1. Turn the Filter assembly counter-clockwise and lift to remove
    entire assembly.
2. Lift B and C upwards to remove from A.
3. Lift C upward to remove from B.

Reassemble in reverse order - make sure the Fine Filter
is properly seated.

WARNING!

· Inspect the lters after each use.
· Never run the dishwasher without lter assembly in place.
· Improper placement of the lter or damaged lter may reduce
  the unit’s performance and   may cause damage to dishes 
  and/or utensils. 
· The entire lter assembly should be cleaned at least one a week.

Cleaning the Filters

Use a soft cleaning brush or old toothbrush to clean the Coarse and Fine Filters.  
When cleaning the lters, don’t knock or bang them to remove residues, this could contort
the lters and reduce performance of the dishwasher.

Summary of Contents for SD-2213S






















Reviews: