3
PART IDENTIFICATION
1. Top cover
2. Thermostat control
3. Glass shelf
4. Crisp drawer cover
5. Crisp drawer
6. Adjustable foot
7. Freezer door shelf
8. Refrigerator can shelf
9. Refrigerator door shelf (upper)
10. Refrigerator door shelf (lower)
DOOR REVERSAL
Bottom of Freezer Door
Unscrew the bolts holding the lower hinge bracket.
Move the two fittings on the lower hinge bracket to opposite side.
Lay the bracket and bolts aside for now.
Remove the screw and plastic hinge bush and relocate to opposite side.
Remove and freezer door and set aside.
Bottom of Refrigerator Door
Unscrew the bolts retaining the middle hinge and remove the door.
Top cover
Unscrew the upper hinge pin and relocate to opposite side.
Replace the refrigerator door and the middle hinge.
Replace the freezer door and lower hinge.
Check that doors are properly aligned and seals are in contact with the
body all around before tightening screws and bolts.
Return unit to upright position and check again that the door seals are in
contact with the cabinet at all points.
If necessary, the hinge positions can be adjusted to ensure this is
achieved.