1
SAFETY PRECAUTIONS
The appliance should be positioned so that the plug is easily accessible.
If the supply cord is damaged, please contact the manufacturer or licensed electrician.
The appliance shall not be used in open air and shall not be exposed to rain.
Do not store items such as ether, methanol, gasoline, etc. in refrigerator, which may evaporate, burn or explode.
Do not place heavy items on top of refrigerator and do not pour water onto unit.
Connect refrigerator to an independent electrical socket and use a safe ground wire. The voltage should be
limited within the range from 97V to 127V or the main motor will be damaged.
Should the power supply be accidentally cut-off, do not turn it back on immediately. Wait 5 minutes to prevent
compressor from being damaged.
In order to conserve electricity, place unit in a well-ventilated space with proper air circulation.
Keep electrical wire away from the compressor and condenser.
To conserve energy, reduce the frequency and duration of opening the door to a minimum.
Do not touch items in the freezer compartment (especially metal containers) with wet hands to prevent frostbite.
It is not recommended to use any extension cords.
WARNING:
Keep ventilation openings of the appliance clear of obstruction.
Do not use mechanical devices or other means to accelerate the defrosting process, other than those
recommended by the manufacturer.
Do not damage the refrigerant circuit.
Do not use or place any electrical appliances inside the unit.
If the appliance cannot be used any more, please check with your city for proper disposal instructions.
ELECTRICAL REQUIREMENT
Failure to follow these instructions can result in death, fire or electrical shock.
Before moving refrigerator to its final location, it is important to make sure you have the proper electrical connection.
Recommended Grounding Method
This refrigerator is equipped with a 3-prong (grounding) plug, which mates with a standard 3-prong wall outlet. DO
NOT, UNDER ANY CIRCUMSTANCES, CUT OR REMOVE THE THIRD PRONG FROM THE POWER CORD. If you
have only a 2-prong wall outlet, it is your responsibility to have it replaced with a properly grounded 3-prong wall
outlet. Do not use an extension cord.
NOTE: Before performing any type of installation, cleaning, or replacing a light bulb, turn the refrigerator control to the
OFF position and disconnect the refrigerator from electrical source. When you are finished, connect the refrigerator to
electrical source first and reset the control to desired setting.
WARNING:
DO NOT REMOVE GROUND PRONG.
DO NOT USE AN ADAPTOR.
DO NOT USE EXTENSION CORD.