SPT AB-765, Instruction Manual

Page: 5 / 7

AUTO
CUSTOM
FIR
HEAT
MANUAL
MANUAL
FIR HEAT
TOE ARCH HEEL
SPEED
DIRECT ION
Before connecting power, check that the
voltage corresponds with the required 120V.
Once power is connected, unit will beep once
and all indicator lights will illuminate for 1~2
seconds then dim. Power indicator will begin
to flash, unit is now in standby mode.
POWER
Press to turn unit on. Unit defaults in POWER
P1 auto-program.
AUTO
Press to select one of 8 auto-programs.
CUSTOM
Press to select concentrated massage on the
toes, arch or heel.
FIR HEAT /

Press once to turn on Far-Infrared function.

Press again to turn on Heating function.

Press again to turn on both Far-Infrared
and Heating functions.

Press the forth time to turn functions off.
Note: Works with all functions.
MANUAL
Press to enter manual mode

Press or to select speed (3 speeds).
 
SPEED:

Press or to change direction.
 
DIRECTION:
NOTE

Each massage session is set for 15 minutes. When function is changed, unit will
restart the 15-minute timer.

P POWER ressing the button during a massage will end the session, unit will return to
standby mode (with power indicator flashing).

CAUTION: To prolong the life of this massager, do not unplug power while unit is
operating. Always press the button to stop function then unplug. POWER
OPERATING INSTRUCTIONS