PARTS IDENTIFICATION
OPERATING INSTRUCTIONS
This massager can be used on various parts of the body,
such as waist, hip, back and thigh.
1. Connect adapter to unit.
2. Plug adapter to power socket. A “beep” will be heard, unit
is powered and in standby mode.
3. Strap belt through one end of the hoop. Place massager
on desired body part, then strap belt around and through
the other hoop. Secure in place.
4. Press the button to begin. Unit will automatically
operate under Intelligent mode.
5. Press
button to change to Manual mode.
6. To turn off, press button again.
NOTE: Each session operates for 15 minutes and unit will
shut-off automatically.
Mode Selection
The massager has two modes: Intelligent mode and Manual
mode.
Default is Intelligent mode: power indicator and mode
indicator are both lit. Press the
button and massager goes
into manual mode (mode indicator goes off); pressing the
button again will return to intelligent mode and the cycle
repeats.
Speed Option
Intelligent mode: speed cannot be changed. Unit cycles
through different speeds and operates under a pre-
programmed massage.
Manual mode: 5 intensity speeds. Press the or button to
change the speed. Highest speed is 5 and lowest speed is 1.
When switched over to manual mode, default is at speed 1.
NOTE: turn off unit and unplug from power when done.