7
press[FEED]button, the printer begins to feed paper and stops over the
position of black mark or label spacing. If the paper is not the black mark or
label paper, the printer stops automatically after feeds paper for 4
inches(about 101mm). And also alarm the error of paper out if use label paper
or black label mode. [FEED]button confirmed as paper feed button by default,
which can be shielded or changed into print button by command.
3.2.5 Hexadecimal Printing
The function of hexadecimal printing is to print the information received from
host machine by hexadecimal numbers and corresponding characters. It will
be convenient to debug application.
Into hexadecimal printing: Power off, press the[PAUSE]button and
[MODE]button then press the power button at the same time. Then loosen
these two buttons when you hear ‘one low one high’ prompt tone of power on.
The printer print ‘ Hexadecimal Dump’, printer prompted into hexadecimal
printing mode.
Quit hexadecimal printing :The way to quit hexadecimal printing mode is
switch off the printer or press the [FEED] button for three times to enter the
normal working mode.
When quit by pressing [FEED]button,
‘***Completed***’ can be showed to indicate.
3.2.6 Printer Parameters Setting
Printer support two methods to set printing parameters, button operation and
setting tools. The method for setting tools can refer to documents for setting
tool.
Under the status of power off, hold down the [PAUSE]button and
[FEED]button,
then press the power button. Then loosen the [FEED] button when you hear
‘one low one high prompt tone of power on. Hold the [PAUSE] button and
press the [FEED]button twice, the printer print ‘Parameter setup mode’
indicating into parameter setting mode. (Refer to Appendix A.)
Quitting
parameter
setting:hold
down
the
[PAUSE]button,
press
the[FEED]buttons, then loosen [PAUSE] button and [FEED] button. Printer will
save the set parameter and print ‘Exit Set Mode’, then exit the parameter
setting mode and enter the normal working mode. The setting parameters
won’t be saved if you press the [POWER] button directly to turn off the printer.
B. Users can set more parameters by using the specification
〈
SP-TL21 Setting
Tools
〉
software through computer. The setting includes: language, font, default
code page, Bluetooth device name and password, printing mode etc. About
the setting method please refer to the <SP-TL21Setting Tools Software Help>,
offered with the software together.
