17
direction shown in the picture above. If succeed, the printer
will send out the beeping of
“one high one low”, and showing
“punch the card successfully”, at the same time, sending the
information of the card to client-side according to relevant
transfer channel, and quitting the card mode back to the
normal printing mode. If it does not succeed, he printer will
send out the beeping of
“two high”, and showing “failure to
punch the card
”, and back to the card mode waiting for
continue to punch the card.
The detailed operation of this command and data format of
the magnetic card please see < T6 Technical Manual>
3.7 Operation of IC Card
T6 printers built in the function of reading and writing the IC
Card, there are three slots of IC Card, one is main, the other
two are auxiliary. The positions are as the picture below:
