8
when hearing the ‘one low one high’ prompt tone, then the printer will in
working status; the power indicator will be green.
Notice: when the battery is almost exhausted, the power indicator will be red,
please charge or change the battery if you continue to use the printer. The
method of charging the battery, please refer to 3.2.5.
3.2.2 Switch Off
In the status of power on, pressing the on/off button for one second, and loose
when hearing the ‘one high one low’ prompt tone, then the printer off and all
the indicators off.
3.2.3 Self-test
After receiving the printer, user can check its current setting and status at
anytime.The method of self test is as following: Switch off the printer (if the
printer in working mode), holding down the
【
FEED
】
button, then turn on the
power (press the on/off button) at the same time. Then loosen the
【
FEED
】
button after hearing the power on prompt tone and the current setting and
status will be printed out.
3.2.4 Paper Feeding (Manual Feeding)
When the printer works normally, hold down
【
FEED
】
button, the paper feeding
begins, and stops when stopped holding the
【
FEED
】
button. When the printer
works in black mark mode or label mode, hold down
【
FEED
】
button, the printer
begins to feed paper and stops at the position of black mark or gap. If the
paper is not black mark paper or label paper, the printer stops automatically
after feeding paper for 30cm.
3.2.5 Battery Charging
The charging method is as following:
connecting the adapter to the power
socket, then plug the power charging plug to the power socket of the printer, so
the power charging begins. During the power charging, the charging indicator
goes red; while goes green when the charging is full. It takes about 2 hours to
charge up the battery.
Using the printer during the charging power period will make the charging time
go longer.
3.3 Printer Setting
