background image

10

type (DEVICE), the outer appearance and pins are as below picture:

3.4.3 Bluetooth Connection

Hand-held device, laptop and other information terminal devices with Bluetooth

can drive T1BTDM/L21BTDM to print by the Bluetooth interface.

T11BTDM/L21BTDM portable printer is compatible with Bluetooth2.0

standard(T11BTDM/L21BTDM is compatible with Bluetooth2.0 regulation and

Bluetooth4.0) and power class is CLASS 2, effective communication distance

is 10meters. The initial name of the printer is T11 Bluetooth Printer/L21

Bluetooth Printer, the initial password is ‘1234’. Users can change the printer

name and password by using< T11/L21 Setting Tools> software. Please see

the details of changing the device name and password in help file of < T11/L21

Setting Tools>.

Before working, T11BTDM/L21BTDM Portable Thermal Printer needs to be

paired with host device. Pairing begins with the host device. Usual pairing

steps are as below:

1. Switch on printer;

2. Host device searches for the outer Bluetooth device;

3. If there are other Bluetooth devices, please select T11BT Printer/L21BT

Printer;

4. Enter the password ‘1234’;

5. Pairing finished.

Please see details in host device Bluetooth function instruction for reference.

Notice:

If user doesn’t change the device name, during pairing, pls do not switch on

other printers, otherwise, it will be difficult to identify which printer is paired

successfully.

Summary of Contents for SP-RMT11/L21
















Reviews: