2.2 Other Specification
●
Paper Loading Method:
drop-in easy loading
●
Black Mark Location:
available
●
Paper End Detection:
when paper is out, the MODE Indicator will constant on lighting. Meanwhile,
the buzzer will ring twice
●
Printing Control Command:
ESC/POS compatible command set
(refer to<T10 Printer Developer Manual >).
●
Power Supply:
1500mAh rechargeable polymer lithium battery.
●
Low Power Alarm:
when the battery is low, the power indicator blinks with red color; if the voltage
is lower than 6.2V , the printer will turn off power.
●
Sleeping:
the printer will fall after at least 5 seconds without usage into sleep, and can be awaken
by pressing
【
FEED
】
button or sending data to it.
●
Battery Charging:
quick charging, it will be fully charged about 1-3 hours;
●
Battery Duration:
under 25% printing density, at least 200 meters; the standby time is over
5days. (These parameters are just for reference. Long term usage will cause
the capacity decline, and can not ensure the time of printing.)
Chapter 3 Operation Method
3.1 Using Preparation
3.1.1 Battery Installation