SPRT SP-RMT10 User Manual Download Page 13

Black mark mode

       

   

 

    FEED                                                           

 

 

 

 

          FEED

 

 

Black mark position

       

   

 

    FEED                                                           

 

 

 

 

 

FEED

 

 
 
 

FCC Statement 

This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable 
protection against harmful interference in a residential installation. This equipment generates 
uses and can radiate radio frequency energy and, if not installed and used in accordance with 
the instructions, may cause harmful interference to radio communications. However, there is 
no guarantee that interference will not occur in a particular installation. If this equipment does 
cause harmful interference to radio or television reception, which can be determined by turning 
the equipment off and on, the user is encouraged to try to correct the interference by one or 
more of the following measures: 
-- Reorient or relocate the receiving antenna. 
-- Increase the separation between the equipment and receiver. 
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is 
connected. 
-- Consult the dealer or an experienced radio/TV technician for help. 
This device complies with part 15 of the FCC Rules. Operation is subject to the following two 
conditions:(1) This device may not cause harmful interference, and (2) this device must accept 
any interference received, including interference that may cause undesired operation. 
Changes or modifications not expressly approved by the party responsible for compliance 
could void the user's authority to operate the equipment. 
 
 
 

 

 

 

 

Off 

on 

Right 

Left 

Summary of Contents for SP-RMT10














Reviews: