2.2 Paper Installation
2.2.1 Paper Loading
POS88V adopts 79.5mm width thermal paper roll.
Steps of Loading Thermal Paper Are as below:
Hold down the upper cover button on the left side, open the
movable upper cover, draw a certain length of the paper roll, put
the paper end on the print head, close the upper cover and press it
downwards lightly.
1. Pay attention to the direction of loading paper,
make the printing surface face to the print head.
2. Please don’t feed or draw the paper forwards or
backwards with hands.
3. Keep clean of the print head, avoid to influence
the printing quality.
2.2.2 Solution to Paper Jam
If cutter jam, turn off the power, and turn on again, the cutter will
be back to original position. If paper jam, open the paper strage
！
Caution!