6
2.2 Paper Installation
2.2.1 Paper Loading
POS88V adopts 79.5mm width thermal paper roll.
Steps of Loading Thermal Paper Are as below:
Hold down the upper cover button on the left side, open the movable upper
cover and put the paper roll into it, draw a certain length of the paper roll, put
the paper end on the print head, close the upper cover and press it downwards
lightly.
1. Pay attention to the direction of loading paper,
make the printing surface face to the print head.
2. Please don’t feed or draw the paper forwards or
backwards with hands.
3. Keep clean of the print head, avoid to influence
the printing quality.
2.2.2 Solution to Paper Jam
If cutter jam, turn off the power, and turn on again, the cutter will be back to
original position. If paper jam, open the paper cover, and take out the paper. If
the cutter can not be back to the original position, open the cover of it, and turn
the white plastic gear by the direction suggestive on the cutter by hand to
make the cutter be back to the original position.
!
Caution!