SPRT SP-POS58III, User Manual

Page: 12 / 21

SPRT
１１
× × D5 D4 × × ×
1: Double Width Print
AAA
Decimal: 27 50
Hexadecimal: 1B 32
Explanation:
Set line spacing to 1/6 inch.
ESC 3 Set Line Spacing to n Dot Lines (n/203 inch)
Format: ASCII
：
ESC 3
Decimal: 27 51
Hexadecimal: 1B 33
Explanation:
Set line spacing to n dot lines. n=0~255.
One dot line is 1/203 inch for SP-POS58III, this command sets the dot-line
spacing to n/203 inch. Default n=30.
Example:
BBB n=30, 30 dot spacing (30/203 inch)
3.2.3 Character Print Commands
ESC
！
Set Character Print Mode
Format: ASCII: ESC
！
n
Decimal: 27 33 n
Hexadecimal: 1B 21 n
Explanation:
ESC
！ n is a comprehensive command to set character print mode, is used
for selecting print character size. Each bit of print parameter n is defined:
1: Double Height Print
Default n=0, that means no character enlargement.
ESC SO Set Double Width Character Print
Format: ASCII: ESC SO
Decimal:
27 14
Hexadecimal: 1B 0E
Explanation:
All characters following this command on the same line are printed in
double width, this command can be canceled by a carriage return or DC4
command.