SPRT
９
Fig.2-9 Power Socket
2.3.4 Power Connection
SP-POS58III uses external power supply as 12V, 2A, power socket is
A-1009-3P model, as Fig. 2-9 shows:
2.4 Buttons and Indicators
Power Switch:
control the power on or off status.
is power off
status, “
－
” is power on.
FEED Button:
hold down the button, paper feeding starts, release it, paper
feeding stops. (If there is buzzer installed, then the buzzer will alarm
during paper feeding.)
Handspike:
hold down the handspike, the upper cover opened.
Power Indicator (RED):
indicates the power status.
Status Indicator (GREEN):
define as below:
Status Definition
On Online
Off Offline
Flicker one time then turn
off
Paper out
Flicker twice then turn
off
Print head overheat
2.5 Self-test
The self-test can check the condition of printer, if the printer prints out the
self-test receipt correctly, it means the printer works normally. Otherwise it
needs to repair.
The self-test will print out the firmware version, interface setting and
character set.
Holding down FEED button and turn on the power, then release the button,
self-test begins automatically.
Chapter 3 Print Control Commands
3.1 Summary
