7
paper ( 58mm width ) as default under Receipt mode. Black mark paper
( 44mm width ) as default under Invoice model.
Standard Mode: Standard 80mm mode, Standard 58mm mode, Standard
44mm mode. Standard thermal paper as default under Standard mode.
Set the Printing mode and Paper type by Setting Tool (Way Bill mode and
Invoice mode)
3.2.1 Switch On
Press
【
POWER
】
button about 1 second later you will hear ‘one low one
high ’prompt tone. The LCD shows “Loading...”, then the printer turns into work
mode when loosen the
【
POWER
】
button. The LCD shows printer parameter.
3.2.2 Switch Off
Under status of switch on,the printer will send out the prompt tone of ‘one low
one high ’ after pressed the
【
POWER
】
button for 1 second, the LCD turns off,
then loosen the
【
POWER
】
button, the printer is off.
3.2.3 Paper Feeding (Manual Feeding)
A. Standard Mode:
Under the normal work status and apply to thermal receipt paper, press
【
FEED
】
button, the paper feeding begins, and stop when loosen
【
FEED
】
button. When the printer apply to black mark paper and label paper, press
【
FEED
】
button, the printer begins to feed paper and stops over the position of
black mark/label spacing. If the paper is not the black mark/ label paper, the
printer stops automatically after feeds paper for 30cm. And alarm the error of
paper end for label paper.
B. Logistics Mode:
Under the normal work status and apply to receipt, press
【
FEED
】
button, the
paper feeding begins, and stop when loosen
【
FEED
】
button. When the printer
apply to invoice and waybill, press
【
FEED
】
button, the printer begins to feed
paper and stops over the position of black mark/label spacing. If the paper is
not the black mark/ label paper, the printer stops automatically after feeds
paper for 26cm. And alarm the error of paper end for waybill.
3.2.4 Self-Test
After receiving the printer, user can check its current setting and status at
anytime.
Self-test way is as below: Power off, then hold down the
【
FEED
】
button and
press the power button at the same time. Then loosen the
【
FEED
】
button when
you hear ‘one low one high ’prompt tone and LCD shows “Loading...”, the
