8
current setting and status will be printed out.
3.2.5 Hexadecimal Printing
The function of hexadecimal printing is to print the information received from
host machine by hexadecimal numbers and corresponding characters. It will
be convenient to debug application.
Into hexadecimal printing: Power off, hold down the
【
MODE
】
button and press
the power button at the same time. Then loosen the power button and press
the
【
FEED
】
button when you hear ‘one low one high’ prompt tone of power on
and LCD shows “Loading...". After that you may loosen the
【
MODE
】
button
and
【
FEED
】
button. The printer turns into the hexadecimal printing mode and
print the presentation.
Quit hexadecimal printing :The way to quit hexadecimal printing mode is
switch off the printer or press the
【
FEED
】
button for three times. The printer
will also print the presentation which shows that the printer have quit
hexadecimal printing mode.
3.2.6 Printer Parameters Setting
This function may set some simple printing parameters. There’re two methods
of entering into parameter setting mode, which can set different parameters.
A. Under the state of power off, hold down the
【
FEED
】
button and press the
【
POWER
】
button at the same time. Then loosen the
【
POWER
】
button and
【
MODE
】
button orderly when you hear ‘one low one high prompt tone and
LCD shows “Loading...”. The printer turns into the parameters setting mode.
Press the
【
FEED
】
button or
【
MODE
】
button, LCD shows the first item which
can be set parameters and the current numerical value. (Refer to Appendix
A.)
Quitting parameter setting: Hold down
【
MODE
】
and
【
FEED
】
buttons, then
loosen
【
MODE
】
button and
【
FEED
】
button. Saving the set parameter and
exiting the parameter setting mode. The setting parameters won’t be saved if
you directly press the
【
POWER
】
button to turn off the printer.
B. Under the state of standby power, press the
【
MODE
】
button to enter the
parameter setting mode. Use the
【
MODE
】
button to select the setting
parameter item, and use the
【
FEED
】
button to select the sub-menu of
parameter item.(Refer to Appendix B.)
Wait for 5 min. to save parameters value automatically.
