Sprint PCS CDM9155SP, Getting To Know Manual

Page: 104 / 145

Setting Up a Sprint PCS Wireless Web Connection
Getting Started
Your wireless Internet-ready Sprint PCS Phone allows you to
connect to a laptop PC, hand-held or palm-sized computing device
to send and receive e-mail, access the Internet or your company’s
network and more, without searching for a wall-mounted
telephone jack. In just three steps, you can use your connectivity:
1.
First, you’ll need a Sprint PCS Wireless Web Connection Kit
(sold separately).
2.
Connect your laptop PC to your Sprint PCS Phone by using the
serial data cable. The cable adapter will connect to a handheld
or palm-sized computing device.
3.
Finally, take a few minutes to install the Sprint PCS Dialer SM
software onto your computer using the CD.
䊳
For complete details on how to install and use the software,
refer to the user guide in the Sprint PCS Wireless Web
Connection Kit you purchased.
Note:
You will not need to install the Sprint PCS Dialer for Palm
®
or
HPC/Windows CE.
Placing a Data Call
To place a data call when you’re connected to the Sprint PCS
Wireless Web:
1.
First, make sure the cable is connected properly.
2.
Open the Sprint PCS Dialer application on your computer and
place the call.
䊳
The phone displays the number your computer is calling and a
“connecting” message is displayed.
䊳
Once the call successfully connects, your phone’s display shows
you information on the status of the data call.
Section 13
98 Experiencing Sprint PCS Wireless Web