CAUTION!
EQUIPMENT DAMAGE HAZARD
This product conforms to IP00 protection. Consider the installations
environmental conditions for safe and reliable operation.
7
Mechanical dimensions
To access the three M4 fixing holes, remove the plug from the terminals and lift away the
plastic cover.
•
Use the central hole to mount the drive on a DIN rail fixing bracket (part no. FE101969).
•
Use the upper and lower holes to mount the unit on a flat metal back panel (to improve
its thermal performance). For optimum thermal connection, ensure the back panel is flat
and that both mating surfaces are in good thermal contact.
The heatsink casing is isolated
from the electronics.
If earthing is required, use
a ring terminal on the lower
fixing.
The maximum voltage allowed
between the isolated heatsink
and the drive V- supply on
terminal 6 is 50 V rms.
Figure 6 Fixing and connection details
3
3 Mechanical dimensions
Mechanical dimensions
35
82
40
12
Dimensions are in millimetres
35
40
Summary of Contents for 200XLV
Page 6: ......
