6
(615) 599-1505 www.springtree.net
DMX Linking
The Spatial Wash COB RGBW can be connected to a DMX controller using a 3-pin DMX
cable, allowing total control over one or more fixtures. To do this, connect a DMX cable from
the DMX-output on your controller to the DMX-input (labeled
DMX IN
) of the lighting unit.
Connect a second light via its DMX-input to the first unit’s DMX-output (labeled
DMX OUT
) to
control and synchronize multiple lighting units at once.
Powercon power cables
DMX IN
DMX IN
DMX IN
DMX OUT
DMX OUT
Touch buttons
There are four touch buttons on the back of the fixture: MENU, UP, DOWN, and ENTER.
Normally the LED will display the current DMX address code of the fixture. Press UP and
DOWN to choose the desired function and press ENTER to confirm.
Operation
Rear View