SpringCard Prox'N'Roll Reference Manual Download Page 2

Page: 2 / 58

PMA8N9P-BC

2 / 58

PROX'N'ROLL RFID SCANNER - Reference manual

SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.

All other brand names, product names, or trademarks belong to their respective holders.

Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.

DOCUMENT INFORMATION

Category :

Manual

Keywords :

Group :

Prox'N'Roll

RFID Scanner, Reader, Prox'N'Roll, HID, Configuration

Reference :

PMA8N9P

Version :

Abstract :

Status :

Approved

pma8n9p-bc.doc
saved 02/06/09 - printed 02/06/09

REVISION HISTORY

Valid. by

Ver.

Date

Author

Tech.

Qual.

Approv.

Remarks :

02/06/09

LTX

ECL

Change the default value of General Option (OPT)

13/05/09

LTX

ECL

Added new keyboard layout

20/02/09

LTX

JDA

SpringCard branding.
Added reference to “RFID Scanner” family. Common chapters now shared with other
products along the same family.
Added serial mode and reference to CrazyWriter / CSB6.

03/12/08

LTX

Initial release, Pro Active branding

Summary of Contents for Prox'N'Roll



























































Search results

Summary of Contents for Prox'N'Roll

Reviews:

SpringCard Prox'N'Roll, Reference Manual, Page: 2 / 58

Search results

Summary of Contents for Prox'N'Roll

Reviews: