SpringCard Prox'N'Roll Page 39 Reference Manual Download

Page: 39 / 58

PMA8N9P-BC

39 / 58

PROX'N'ROLL RFID SCANNER - Reference manual

SPRINGCARD, the SPRINGCARD logo, PRO ACTIVE and the PRO ACTIVE logo are registered trademarks of PRO ACTIVE SAS.

All other brand names, product names, or trademarks belong to their respective holders.

Information in this document is subject to change without notice. Reproduction without written permission of PRO ACTIVE is forbidden.

4.2.1. List of commands

Command

Action

Reader goes inactive (tag polling is halted)

Reader goes active

Switch red LED off

Switch red LED on

Red LED blinks slowly

Red LED blinks quickly

Switch green LED off

Switch green LED on

Green LED blinks slowly

Green LED blinks quickly

Stop buzzer

Start buzzer

Short buzzer sound

Long buzzer sound

Margz

Same as sending Aa + Rr + Gg + Zz

Mrg

Same as sending R

+ G

Marg

Same as sending A

+ R

+ G

RST

Reset the reader

VER

Retrieve reader’s version

SHO

Retrieve reader’s settings

Choose appropriate configuration in CLD and CBZ before using the LEDs or
buzzer related commands.

Summary of Contents for Prox'N'Roll



























































Search results

Summary of Contents for Prox'N'Roll

Reviews:

Related manuals for Prox'N'Roll

Brands by name

Popular brands

SpringCard Prox'N'Roll, Reference Manual

Search results

Summary of Contents for Prox'N'Roll

Reviews:

Related manuals for Prox'N'Roll

Brands by name

Popular brands