Spring VULCANO CERAMIC, Instructions For Use Manual

Page: 7 / 12

7
before you first use the pan
Wash your VULCANO CERAMIC pan in hot
water with some detergent and a soft sponge.
during use
VULCANO CERAMIC pans are suitable for
all types of cooking equipment: gas stoves,
spiral hotplates and sealed plate electric
hobs, ceramic and induction cookers.
To get the most out of the special features of
your VULCANO CERAMIC pan, you should
note the following tips:
„ „ Only„ heat„ the„ empty„ pan„ to„ frying„
„temperature„ (180ºC).
Overheating to
more than 400ºC can damage or even
destroy the non-stick coating.
„ „ When„using„the„pan„with„an„induction„
unit,„turn„the„unit„up„only„2⁄3„of„the„way.
„
Use heat-stable cooking oil if required. Do
not use olive oil. This can affect the non
stick properties of the coating.
„
Never place the empty pan or leave it
standing on a hot stove that is still turned
on.
„
Use gadgets made of soft plastic, silicone
or wood only.
„
Avoid utensils with sharp edges. If,
despite this precaution, cuts and
scratches appear, they will not effect the
non-stick coating.
after use
After each use wash the pan thoroughly in
hot water. Burnt-on food can be removed
with a soft sponge and a mild degreasing
detergent. Any dirt that is not burn on can
be rubbed off with a paper towel. Never use
hard synthetic sponges, steel wool, cleaning
pads or scouring powder.
We advise against cleaning your VULCANO
CERAMIC pan in a dishwasher. Frequent
cleaning in a
dishwasher can significantly
reduce the life of the non-stick coating.
Occasionally put a few drops of heat-stable
cooking oil in the pan and wipe them away
with a paper towel. This helps keep the
non-stick coating smooth.
instructions for use
e
BA_VulcanoCERAMICPfannen_2012.indd 7 17.01.13 07:57