70)
To ensure the drain line doesn’t
come out from the drain a pair of
zip ties are recommended. They
can be inserted through two pairs
of holes drilled high up in the
drainpipe.
71) Pushing the zip ties inwards will
create a loop.
69) Before turning the water
back on to the home, use the
provided spanner wrench to
fully tighten the pre-filter
housing.
72) Insert the drain line into the
zip tie loops and secure in pace.
The excess can then be trimmed
off the zip ties.
73) The power cord will be
connected to the connection
on the far left beneath the
electronic tank head.
74) The power adapter will then
be plugged into a power supply
that isn’t controlled by a switch.
Questions? Call (800)-589-5592
16
Whole House Filter and Water Softener
Additional Softener Head Steps
IMPORTANT!
Ensure the drain lines you installed are not pinched or kinked or it will impede
the flow of water from the system.
76) Locate the batter
connection beneath the
display.
75) Lift off the cover to the
electronic head.
77) Replace the tank head
cover.
