6
spray.com | 1.800.95.SPRAY | Intl. Tel: 1.630.665.5000
TROUBLE SHOOTING GUIDE
The following table indicates various potential modes of failure for this product.
Mode of Failure
Preventative or Corrective Actions
Poor spray performance
Check unit for external damage. Look for evidence of mishandling that may have damaged
shafts, bearings, or alignment.
Nozzle hub fails to rotate and
no liquid passes:
Check for liquid pressure and volume at the unit.
Check strainer for filter blockage.
Remove nozzles and check for obstructions.
While nozzles are off, recheck for flow through the nozzle hub.
If the unit fails to rotate and
sufficient liquid passes:
Check for freedom of rotation, by hand, in the vertical and rotational axis.
If the unit is free and still does not rotate, check for:
1. Contamination in the unit.
2. Wear of any of the bushings or bearings.
3. Galling and straightness of the shaft.
WARNING:
Replace all defective or worn parts.
SPRAYING SYSTEMS CO. WARRANTY
Seller warrants that its products will conform to and perform in accordance with the products’ specifications. Seller
warrants that the products do not infringe upon any copyright, patent or trademark. THE FOREGOING WARRANTIES ARE
IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THOSE CONCERNING
MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
Because of the difficulty of ascertaining and measuring damages hereunder, it is agreed that, except for claims for bodily
injury, Seller’s liability to the Buyer or any third party, for any losses or damages, whether direct or otherwise, arising out of
the purchase of product from Seller by Buyer shall not exceed the total amount billed and billable to the Buyer for the product
hereunder. IN NO EVENT WILL SELLER BE LIABLE FOR ANY LOSS OF PROFITS OR OTHER SPECIAL OR CONSEQUENTIAL
DAMAGES, EVEN IF SELLER HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
For newly purchased units, the warranty is 18 months from the date of shipment or 12 months from the date of installation,
whichever occurs first. This warranty includes manufacturing defects but does not cover wear of components. This warranty
will be void if parts other than those supplied by Spraying Systems Co. are used or if the unit is modified by anyone other
authorized Spraying Systems Co. personnel. Modifications to the unit may void the 3-A symbol and put the unit outside 3-A
sanitary compliance.
