Maintenance
•
Your sprayer pump “O” ring was lubricated with petroleum jelly. Keep it
lubricated for longer “O” ring life with petroleum jelly or grease.
• Release pressure from sprayer by slowly unscrewing fill cap on tank.
Replacing Pump “O” Ring
1. Release pressure from sprayer by slowly unscrewing fill cap on tank,
unscrew pump nut and pull out pump handle.
2. Remove old “O” ring and replace with new “O” ring.
3. Make sure new “O” ring is lubricated with petroleum jelly for long
lasting use.
Cleaning
1. Release pressure from sprayer by slowly unscrewing fill cap on tank.
2. Always empty the sprayer and clean thoroughly after each use.
3. Fill tank halfway with water and pump the water out until all contents
and air exit through the nozzle.
4. Repeat several times.
19
Summary of Contents for TCB100
Page 2: ......
Page 20: ...DETAIL EXPLODED VIEW 18...
