9
Sensor Unit Power ON
•
For start system operation, Power ON/OFF button need to be single pressed
•
Green led will turn on and it will start transmitting tension data
•
It will remain ON until not turned off
Cable Size Selection Procedure
•
Desired cable size can be selected by single press on Cable Size Selection button.
•
It will change from one cable size to the other on subsequent Cable size key press as shown.
•
Supported cable diameter sizes are 1/16, 1/32, 1/8, 5/32, 3/16 inches.
•
Each cable size calibration needs to be done independently.
Sensor Out of Range
•
In case sensor is placed out of range or if it is turned OFF, it will display following
Over Temperature Shutdown
•
In case sensor unit temperature reaches beyond 60
o
Celsius/ 140
o
Fahrenheit, sensor unit will
go into shutdown.
Tension/Temperature Unit selection
•
Meter supports both lbs unit (lb. for tension and degree Fahrenheit for temperature) and
metric unit (kg for tension and degree Celsius for temperature measurement).
•
Pressing it will change from lbs to metric or metric to lbs when pressed
Zero load Setting
•
Zero load can be set using Zero button. Once set to zero, tension value read will get set to 0lb