Spracht Limited Warranty Policy
Spracht warrants its products against defects or malfunctions in material and
workmanship under normal use and service, with the exceptions stated below. This
warranty lasts for one year from the original date of purchase. Coverage terminates
if you sell or otherwise transfer the product. In order to keep this warranty in effect,
the product must have been handled and used as prescribed in the instructions
accompanying the product.
Spracht shall (at its option) repair or replace a defective unit covered by this
warranty, or shall refund the product purchase price. Repair, replacement with
a new or reconditioned unit, or refund, as provided under this warranty, is your
exclusive remedy. This warranty does not cover any damages due to accident,
misuse, abuse, or negligence. Spracht shall not be liable for any incidental or
consequential damages. Some states do not allow limitation or exclusion of
incidental or consequential damages, so the above limitation or exclusion may
not apply to you. Implied warranties of merchantability and fitness for a particular
purpose are limited in duration to the duration of this warranty. Some states do
not allow limitations on how long an implied warranty lasts, so the above limitation
may not apply to you. To make a warranty claim, the purchaser must obtain a
return authorization number (RA) from Spracht (serial number and purchase date
required), and then return the product to Spracht at purchaser’s expense. A copy of
the original dated receipt or shipping document must accompany the product. To
obtain a return authorization, see “Warranty” on our website at
www.spracht.com
,
send an e-mail to
, or contact us at:
Spracht, 974 Commercial Street, Suite 108, Palo Alto, CA 94303 USA
Tel: 650-215-7500
For repair or replacement of a failed product, allow 4 to 6 weeks for processing
and shipment.
This warranty gives you specific legal rights, and you may also have other rights
which vary from state to state.
FEDERAL COMMUNICATIONS COMMISSION STATEMENT
Interference Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment. Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
RF Warning Statement:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Zūm BT Prestige™ and Zūm Prestige Combo™ Headset
7