ZūM Maestro BT
™
Charging the Headset
Before you can use your headset, you must charge it. Plug the AC Adapter into
the base and a wall outlet. Place the headset in the base to charge it; the red LED
will be on. The LED will switch to green once charging is complete. If you take
the headset off the base it will go into stand-by mode. If no pairing is active, the
headset will shut down to preserve the charge in the battery.
Setup
Pairing with a
Bluetooth
®
Device
First, make sure that Your device, smart phone or Mac/PC, has
Bluetooth
®
functionality. Activate the
Bluetooth
® function on your device.
Turn on your headset
1. Press the Multi-Function button for at least 6 seconds (for location of the but-
ton, see item 5 on the diagram opposite). The LED (item 4) will alternately flash
red and blue, which indicates the headset is in pairing mode.
2. On your device, search for
Bluetooth
® devices. You should see
ZūMBT
when
you select
Discover
or
Add
on your device. Select
ZūMBT
to begin pairing. You
may need to enter the PIN code “0000” if your device requests it.
3. When the pairing is successful, the LED will turn solid blue and the
ZūMBT
™
icon will show on your device. You can make calls, listen to music, or use it
for Skype™. You should not have to pair again: you can reconnect by pressing
the icon.
4. If pairing did not succeed, turn the headset
OFF
,
and repeat steps 1–3.
1
