2. Press the “Talk” button on the Headset. The talk indicator will light up on both
the Base Unit and the Headset, indicating a successful link. You will now hear the
dial tone through the Headset.
3. Dial using your telephone’s keypad.
4. To end the call, press the “Talk” button again or place the Headset into the charger
to disconnect.
Making a Call with the handset lifter installed
1. Press the “Talk” button on the Headset to connect to the Base Unit. The “In Use”
LED on the Base Unit will flash.
2. Dial using the telephone keypad.
3. To end a call, press the “Talk” button again, or place the headset into the charger
to disconnect the call.
Note: The Headset automatically enters off hook status when it’s off the cradle, you
just need to enter the number to dial out.
Adjusting the Volumes
You must be in talk mode, in other words, on a call, to adjust any of the following
levels. You may want to make some test calls to set the volumes.
Adjusting the microphone volume
Press the “Microphone /-” button to increase / decrease the speaking volume.
Adjusting the Base Unit listening volume
Press the “Listening /-” button to increase / decrease the listening volume.
Adjusting Headset listening volume
Press the volume control or – (on the top of the Headset) to adjust the
listening volume.
Muting the Headset microphone
1. Press the “Mute” button on the Headset; the microphone will be switched off.
The “In Use” LED on the Base Unit will flash rapidly while you’re in Mute Mode.
2. Press the “Mute” button again; the microphone will be back on.
8
EN
Summary of Contents for ZuM DECT 6.0 HEADSET
Page 2: ...Zum DECT 6 0 Headset...
