FN LED C100 DMX - PC LED C100 DMX
9
OPERATING MODE
The luminaire is designed to be used in different
operating modes:
• LOCAL POTENTIOMETER
• DMX
• RDM
DISPLAY INTERFACE
MENU
When switched on, the installed software version
is displayed, followed by the display of the default
settings, ie the currently set operating mode:
-
Manual
, for use with a potentiometer
-
1-3-channel mode
, for DMX/RDM mode
followed by the DMX address assigned to the unit.
Pressing the ENTER key you access the settings and
browse through the submenus by pressing the NEXT
and PREV buttons, which in case of value type
entries will have the function of increasing
or decreasing the values; the changes can be
confirmed with the ENTER button or canceled with
the BACK button.
Struttura del menu - MENU GENERALE
Item
Value
Def
Description
Dmx Settings
Dmx settings submenu
Options
Optional settings submenu
Info
Information submenu
MENU DMX SETTING
Item
Value
Def
Description
Dmx
Address
1..xxx
1
Dmx Address
Dmx
Personality
3 channels mode
2 channels mode
1 channels mode
1 channels mode
Dmx Mode
MENU OPTIONS
Item
Value
Def
Description
LED Delay OFF / 30, 60 ... 600 ms 120 ms
Buffer time on LED
outputs
Dimming
Curve
LINEAR
QUADRATIC
Quadratic Gamma Correction
Out
Frequency
500, 800,1000,1500...
10000,11000, 12000...
20000 Hz
1000 Hz PWM LED Frequency
Led Boost
(*)
OFF
ON
ON
Sets the maximum (ON)
or nominal (OFF) current
value.
Fan Mode
(**)
AUTO
STANDARD
SILENT
AUTO
Selects the fans
operation mode
Display
Rotat.
STANDARD
ROTATED
Standard
180 ° rotation of the
display. Standard =
keys to the right of the
display
Display
Standby
OFF
ON
OFF
By selecting ON the
display turns off
automatically after 60
seconds of inactivity
Default
Set
It sets the default for all
the user parameters
Factory
Setting
For the Manufacturer only
Factory default setting
PREV/-
NEXT/+
BACK
ENTER
PREV/-
NEXT/+
BACK
ENTER
Manual
001
Manual
001
