SPOT xp 575, User Manual, Page: 9 / 19

Linking
Use 3-pin XLR data cables to link the controller to DMX lighting
equipment.
3-pin XLR connectors are follows:
Building a serial DMX-chain:
Connect the DMX output of the first fixture with the DMX input of the
next fixture. And execute all the setups following the above-
mentioned instruction.
Flip the DIP SWITCH #3 of last fixture to ON position for terminal
confirmation.
1 2
3
1 2
3
1:Ground
2:Signal(-)
3.) 1:Ground
2:Signal(-)
3.)
' 0 ; RXW SXW
; / 5 P RXQW LQJVRFNHW
' 0 ; LQSXW
; / 5 P RXQW LQJSO XJ
Connection with the mains
Connect the device to the mains with the power-plug.
The occupation of the connection-cables is as follows:
Cable Pin International
Brown Live L
Blue Neutral N
Yellow/Green Earth
The earth has to be connected! In general, lighting effects should not
be connected to dimming-packs.
7