10106 rev. A
11
INSTRUCTIONS PART 2: Install Bicycle Trays
STEP 1:
Attach the
level 1 position 1
tray to the
holes on the bottom connecting bar
farthest to the left.
Use two (2) 7/8” long 3/8-16 hex bolts and
washers for the rear cross bar. A T45
tamper-resistant Torx screw should be
used to secure the front of the tray.
STEP 2:
Attach a
level 1 position 2
tray using the
holes 16” to the right of the level 1 position
1 tray just installed. Use two (2) 7/8” long
3/8-16 hex bolts and washers for the rear
crossbar. A T45 tamper-resistant Torx
screw should be used to secure the front
of the tray.
Continue all level 1 tray installations
alternating heights between position 1 and
position 2 trayswith a tray every 16”.
