Sportstar Outdoor Pioneer II, User Manual

Page: 25 / 55

Every full minute short double beep
Every 10secs during the last min. short double beep
Every second during the last 10sec short single beep
At completion of countdown timer long single beep
The countdown timer set with the preset values ranging from 1 min to 120 min.
To select the length of the countdown timer press S2 while the timer hasn't started yet. You
can select from 1 to 120 minutes. Preset values are 1 to 15, 15 to 55 at 5 minutes interval,
and 60 to 120 minutes at 10 minutes interval.
You can also view the information of your previous race by pressing S4 before the timer has
been started and then press S1 to scroll down the time per lap or S2 to scroll up.
Please take note that only one race data can be stored in the memory so once the timer has
been restarted the previous data will be erased.
To start the sail timer press S1. After the countdown timer has started you stop it by pressing
S1 and reset it by pressing S2.
Once the countdown timer reaches 0, the count up timer or chrono timer will be activated. So
once the countdown timer reaches 0 it is time to start the race.
To take a split press S2 while count up or chrono timer is running.
To stop the count up timer press S1. To reset the timer press S2.
Press S3 from SAIL mode to enter ALARM mode. The watch will momentarily display ALARM
and then display Alarm 1
The watch is equipped with a dual alarm which can be individually set. You can turn on or off
an alarm and chime in this mode.
Alarm Mode