20
AREA OF INSTALLATION - CROSS BARS
Step 4 - Attach the crossbar to the support legs
Attach A6 to the outer side of A4 and secure using B1, B6, B4 and B3.
Attach A5 to the outer side of A4 and A4-1 (right side of teeter totter) using B1, B6, B4 and B3.
IMPORTANT:
Please note that A6 has two extra holes that will be used for connection to the
slide in later steps. These holes must be located closer towards the front of the swing set where
the slide will go down to avoid the risk of entrapment. The slide can be installed on either side of
the swing set. Should you wish to install the slide on the opposite side, swap A5 with A6.
FIGURE 4
Summary of Contents for MSC-4146
Page 12: ......
