SPORTSPOWER Me and My Puppy Playhouse WP-379, Owner'S Manual & Assembly Instructions

Page: 2 / 49

1
Dear Valued Customer,
Congratulations on your Wood Play Set purchase!
To assure the safety of your children while they enjoy many great moments of outdoor fun,
please assure you thoroughly read and follow this important manual. It contains specific safety
instructions that will assure a safe play experience. All instructions must be followed to assure
proper, safe use of your Wood Play Set.
Age Recommendations:
Children ages 3-8
Commercial Use:
Commercial usage is not warranted. This is a residential Wood Play Set only.
IMPORTANT:

Children must NOT play on this set until it is properly assembled and inspected by an adult.

The Wood Play Set must be properly installed and anchored BEFORE children can play on the Wood
Play Set.

You MUST read and follow all instructions in this manual before installing or attempting to use the
Wood Play Set.
Failure to follow these important requirements may result in the warranty being voided and/or safety
violations that may possibly result in an injury. Please watch your children carefully during the installation
and assembly of the Wood Play set to avoid injury.
Please also pay close attention to the periodic maintenance that is required to keep you Wood Play Set in a
safe condition for maximum enjoyment of backyard fun!
WARNING
BEFORE YOU BEGIN ASSEMBLY!!!

Take a complete inventory of components using the parts list.

Sort and lay out the wood pieces. Label each piece of wood for easy reference. For easy identification
during the assembly process, write the board’s letter on masking tape and adhere to each piece of the
wood. Some wooden components may twist or warp in the carton after packaging. Usually, these parts
straighten out when assembled. You may also see some cracking of the grain. This is normal.

Sort all hardware according to size. Do not worry if extra hardware is included.

Find a safe play location.
o
You MUST install the Wood Play Set on level ground. Uneven ground must be leveled prior to
installation. The manufacturer cannot assume responsibility for any failure from incorrect
installation. Installing on sloping ground will put stress on all the joints, which will cause the
set to become loose and unstable.