TIGHTENING NUTS&BOLTS
MAINTENANCE
● Do not over-tighten the nuts and bolts when you are assembling this equipment, this is to
allow for some possible adjustments and ease of installation.
● Once you have finished the assembly of the equipment, go back over all of the nuts and
bolts and properly tighten all of them before using the equipment.
Make sure that you have all parts listed. If you are missing any parts, please
telephone (+44) 0330 0904 420 for assistance.
● Regularly check this unit for signs of damage or wear. If any damage is visible do not use
until this has been rectified.
● Maintenance must be carried out by a responsible adult.
● Check all nuts and bolts twice monthly during the usage season for tightness and tighten as
required. It is particularly important that the procedure be followed at the beginning of each
season.
● Never use pliers to tighten up screws - these can cause damage to paintwork increasing a
risk of rust damage.
● Tighten all nuts and bolts securely. Replace as needed. If not checked regularly, bolts can
be loose or missed and components can become detached causing injury.
● Check the unit at the beginning of the usage season and monthly thereafter for evidence of
damage/deterioration. Immediately remove and replace any items that appear weak or
broken.
● Check all covers designed for bolts and sharp edges regularly to be certain they are
present and in good condition. Replace as needed. It is particularly important that all covers
are checked prior to the first use in each season.
● Inspect metal parts and hardware for proper closure and for signs of wear, deterioration and
rust damage. Replace as needed.
● Lubricate all metal and moving parts regularly.
● Remove plastic slide section and store indoors during periods of inclement weather and
when temperature drops below 32 degrees Fahrenheit/0 degrees Celsius.
● It is important to check and maintain the main parts at regular intervals. If these checks are
not carried out, this unit could overturn or pose an injury hazard.
● This product cannot be modified.
● It is recommended to leave all fittings finger tight until assembly is complete, for ease of
construction, and then tighten firmly.
● Once assembly is completed, carefully check the slide before use. If you find any problems,
do not allow children to use the slide until it is fit for use.
● Warning. Only for domestic use.
PAGE 2 OF 23
PAGE 3 OF 23
PAGE 4 OF 23
PAGE 5 OF 23
PAGE 6 OF 23
PAGE 7 OF 23
PAGE 8 OF 23
PAGE 9 OF 23
PAGE 10 OF 23
PAGE 11 OF 23
PAGE 12 OF 23
PAGE 13 OF 23
PAGE 14 OF 23
PAGE 15 OF 23
PAGE 16 OF 23
PAGE 17 OF 23
PAGE 18 OF 23
PAGE 19 OF 23
PAGE 20 OF 23
PAGE 21 OF 23
PAGE 22 OF 23
PAGE 23 OF 23
Cord
DESCRIPTION
ASSEMBLY
INSTRUCTION
20/F, Parkview Centre, 7 Lau Li Street, Causeway Bay, Hong Kong.
After Service Centre (+44) 0330 0904 420, Email [email protected] or
visit www.sportspowerfit4kids.com
M7TEG
DOME CLIMBER & SLIDER
