SPORTSPOWER BouncePro TR-0123BGA-168 Assembly, Installation, Care,  Maintenance And User Instructions Download Page 33

DISASSEMBLY OF THE TRAMPOLINE AND ENCLOSURE 

29 

IMPORTANT 

Once you have finished the assembly of the trampoline, go back over all of the nuts and bolts and 
properly tighten all of them before using. 
 
Read this entire manual and make sure all jumpers completely understand all of the safety rules 
printed in the manual and on the various warning signs. Instruct all jumpers in the basic bounces 
described in the manual. 
 
CARE AND MAINTENANCE AND USE INSTRUCTIONS MUST BE READ CAREFULLY BEFORE USING 
THE TRAMPOLINE.  ADULT SUPERVISION IS REQUIRED AT ALL TIMES 

 

Disassembly of the Trampoline and Enclosure 

If you need to disassemble the trampoline, please follow the assembly instructions in reverse and take special 
care to retain all parts. Retain the original packaging for transport purposes. 

 

Do not attempt to disassemble any frame components until all of the springs and the trampoline mat have been 
removed. Wear heavy duty working gloves to protect your hands from injuries during installation by the springs 
and protective goggles to avoid injuries to the eyes. 
 

 

Moving the Trampoline and Enclosure 

 
To move the trampoline, it is recommended for the trampoline to be disassembled and then reassembled in the 
new location. However, if you need to move the trampoline a short distance for any reason, you must use duct 
tape or heavy industry tape to tape all leg joints together. To move the trampoline requires two or more people 
to lift the trampoline from contact with the ground. Do not drag the trampoline along the ground. The trampoline 
must be kept steady and horizontal to the ground during the move. Failure to follow these instructions may 
result in the leg support coming loose which may cause serious injury or death.  


DO NOT USE THE TRAMPOLINE WHEN THE ENCLOSURE IS REMOVED. 

Do not make changes or add attachments to the trampoline that are not authorized genuine sportspower parts. 

The user must carry out changes to the trampoline (e.g. the addition of an attachment) according to the 

instructions of the manufacturer, particularly those attachments which include instructions on their assembly, 

necessary measurements and the correct fastening (e.g. enclosures, climbing assistance). 

 

 

Summary of Contents for BouncePro TR-0123BGA-168









































Reviews: