TRAMPOLINE FRAME ASSEMBLY
11
Trampoline Frame Assembly
BEFORE YOU BEGIN:
Review all steps before assembly and read all precautions before using the
trampoline. At least two adults are required to assemble this trampoline. Protective gloves should be used
during assembly to avoid injuries during installation. Goggles should be worn to avoid injuries to the eyes.
Step 1 – Frame Assembly
Locate the following 30 pieces of steel tubing parts that are needed to assemble the trampoline frame:
6 - Top Rail with Leg Sockets (# 3)
6 - Top Rails (# 4)
6 - Leg Bases (# 5)
6 - Vertical Leg Extensions (# 6A)
6 - Vertical Leg Extension with Indented Hole (# 6B)
Lay out all the parts on dry flat surface as shown below.
Make sure that you have plenty of space and a clean dry area suitable for the assembly of this trampoline. IT IS
ESSENTIAL THAT THE INTENDED SITE FOR THIS TRAMPOLINE IS COMPLETELY FLAT AND LEVEL. If the ground is uneven
this could cause movement in the frame and could cause stress on the joined sections of the frame that could damage
the trampoline and/or can cause serious injury. Make sure the trampoline is assembled where it is to be used. The
trampoline should not be moved after completion.